99-3331
½" Steel Magna-Lok Nose Assembly
P.O.A.
The HUCK 99-3331 nose assembly is designed to install the HUCK ½" Steel Magna-Lok fastener. It is used with the 2620 or 2620PT hydraulic installation tools, where the fastener pintail is ejected from the front or rear of the tool after installation.
99-5000
½" C50L Nose Assembly
The HUCK 99-5000 nose assembly is designed to install the HUCK ½" C50L fastener. It is used with the 2620 hydraulic installation tool, where the fastener pintail is ejected from the front of the tool after installation.
99-5002
½" C50L Nose Assembly
P.O.A.
The HUCK 99-5002 nose assembly is designed to install the HUCK ½" C50L fastener. It is used with the 2620PT hydraulic installation tool. Due to the Pass Through design of the nose, the pintail is ejected from the rear of the tool after installation.
* Price subject to change due to manufacturing lead times and $AUD rate
99-5008
⅝" C50L Nose Assembly
P.O.A.
The HUCK 99-5008 nose assembly is designed to install the HUCK ⅝" C50L fastener. It can be used with either a range of older and newer hydraulic installation tools. This nose assembly will also fit the new 3585 tool.
99-6001
⅝" C50L Nose Assembly
P.O.A.
The HUCK 99-6001 nose assembly is designed to install the HUCK ⅝" C50L fastener. It can only be used with the HPT35RH hydraulic installation tool. Slender in its design, it compliments the HPT35RH tools concept of being used in limited access areas.
99-5010
¾" C50L Nose Assembly
P.O.A.
The HUCK 99-5010 nose assembly is designed to install the HUCK ¾" C50L fastener. It can be used with older HUCK tools like the 585, and is suited the newer 2628 and latest 3585 hydraulic installation tools.
99-6002
¾" C50L Nose Assembly
Made To Order
The HUCK 99-6002 nose assembly is designed to install the HUCK ¾" C50L fastener. It can only be used with the HPT57RH hydraulic installation tool. Slender in its design, it compliments the HPT57RH tools concept of being used in limited access areas.
99-5014
⅞" C50L Nose Assembly
P.O.A.
The HUCK 99-5014 nose assembly is designed to install the HUCK ⅞" C50L fastener. It can be used with older HUCK tools like the 506, and is suited the newer 2630 hydraulic installation tool.
99-6003
⅞" C50L Nose Assembly
Made To Order
The HUCK 99-6003 nose assembly is designed to install the HUCK ⅞" C50L fastener. It can only be used with the HPT70 hydraulic installation tool. Slender in its design, it compliments the HPT70 tools concept of being used in limited access areas.
99-5016
1" C50L Nose Assembly
P.O.A.
The HUCK 99-5016 nose assembly is designed to install the HUCK 1” C50L fastener. It is used with the 507 hydraulic installation tool. The 99-5016 is a shorter standard nose.
99-5016FP
1" C50L Nose Assembly
P.O.A.
The HUCK 99-5016FP nose assembly is designed to install the HUCK 1” C50L fastener. It is used with the 507 hydraulic installation tool. The 99-5016FP (FP an acronym for Fish Plate), has a scalloped leading edge on the anvil. This gives particular clearance advantage when used for installing HUCK fasteners into the profile of railway tracks.
99-5017
1" C50L Nose Assembly
P.O.A.
The HUCK 99-5017 nose assembly is designed to install the HUCK 1” C50L fastener. It is used with the 507 hydraulic installation tool. The 99-5016 is a longer nose assembly giving extra depth in hard to reach areas.
99-6004
1" C50L Nose Assembly
Made To Order
The HUCK 99-6004 nose assembly is designed to install the HUCK 1” C50L fastener. It can only be used with the HPT90 hydraulic installation tool. Slender in its design, it compliments the HPT90 tools concept of being used in limited access areas.
99-5019
1⅛" C50L Nose Assembly
P.O.A.
The HUCK 99-5019 nose assembly is designed to install the HUCK 1⅛" C50L fastener. It is used with the 507 hydraulic installation tool. The 99-5016 is a standard style of nose assembly.
99-5019FP
1⅛" C50L Nose Assembly
Made To Order
The HUCK 99-5019FP nose assembly is designed to install the HUCK 1⅛" C50L fastener. It is used with the 507 hydraulic installation tool. The 99-5019FP (FP an acronym for Fish Plate), has a scalloped leading edge on the anvil. This gives particular clearance advantage when used for installing HUCK fasteners into the profile of railway tracks.
99-5101
½" BOM Nose Assembly
P.O.A.
The HUCK 99-5101 nose assembly is designed to install the HUCK ½” BOM fastener. It is used with the 2620 hydraulic installation tool.
99-5102
⅝" BOM Nose Assembly
P.O.A.
The HUCK 99-5102 nose assembly is designed to install the HUCK ⅝" BOM fastener. It is used with the 2628 or 3585 hydraulic installation tool.
99-5103
¾" BOM Nose Assembly
Made To Order
